data sheet no. pd 10037-d series pvt422 microelectronic power ic hexfet ? power mosfet photovoltaic relay dual pole, normally open 0-400v, 120ma ac/dc general description the pvt422 series photovoltaic relay is a dual- pole, normally open solid-state relay that can replace electromechanical relays in many applications. it util- izes international rectifier?s hexfet power mosfet as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. the output switch is controlled by radiation from a gaalas light emitting diode (led) which is optically isolated from the photovoltaic generator. series pvt422 relays are packaged in an 8-pin, molded dip package with either thru-hole or sur- face mount (gull-wing) terminals. it is available in standard plastic shipping tubes or on tape-and-reel. please refer to part identification information oppo- site. (hexfet is the registered trademark for international rectifier power mosfets) applications ! on/off hook switch ! dial-out relay ! ring injection relay ! general switching part identification pvt422 thru-hole pvt422s surface-mount PVT422S-T surface-mount, tape and reel features ! hexfet power mosfet output ! bounce-free operation ! 4,000 v rms i/o isolation ! linear ac/dc operation ! solid-state reliability ! ul recognized and babt certified www.irf.com 1
series pvt422 2 www.irf.com electrical specifications (-40c t a +85c unless otherwise specified ) input characteristics limits units minimum control current (see figure1) 2.0 ma maximum control current for off-state resistance @ta=+25c 0.4 ma control current range (caution: current limit input led, see figure 5) 2.0 to 25 ma maximum reverse voltage 7.0 v connection diagram output characteristics limits units operating voltage range 0 to 400 v (dc or ac peak) maximum load current @ t a =+40c 5ma control (see figure 1) (single and dual channel operation) 120 ma maximum peak load current (10ms maximum duration) (single and dual channel operation) 350 ma maximum on-state resistance @t a =+25c for 50ma pulsed load, 5ma control (see figure3) 35 ? maximum off-state leakage @t a =+25c, 320v (see figure 4) 1.0 a maximum turn-on time @t a =+25c (see figure 6) 2.0 ms for 50ma, 100 v dc load, 5ma control maximum turn-off time @t a =+25c (see figure 6) 2.0 ms for 50ma, 100 v dc load, 5ma control maximum output capacitance @ 50v dc 12 pf general characteristics limits units minimum dielectric strength, input-output 4000 v rms minimum dielectric strength, pole-to-pole 1000 v dc minimum insulation resistance, input-output, @t a =+25c, 50%rh, 100v dc 10 12 ? maximum capacitance, input-output 1.0 pf maximum pin soldering temperature (10 seconds maximum) +260 ambient temperature range: operating -40 to +85 c storage -40 to +100 international rectifier does not recommend the use of this product in aerospace, avionics, military or life support applica tions. users of this international rectifier product in such applications assume all risks of such use and indemnify international rec- tifier against all damages resulting from such use.
series pvt422 www.irf.com 3 figure 1. typical current derating curve figure 2. linearity characteristics figure 3. typical normalized on-resistance figure 4. typical normalized off-state l eakage
series pvt422 4 www.irf.com figure 7. delay time definitions figure 8. typical output capacitance figure 5. input characteristics (current controlled) figure 6. typical delay times
series pvt422 www.irf.com 5 ir world headquarters: 233 kansas st., el segundo, california 90245 tel: (310) 252-7105 data and specifications subject to change without notice. 10/17/2003 case outlines 01-2030 01 01-2031 01
|
